Outgoing Msg; Ans Set Up - BT QUARTET 2015 User Manual

To record a new outgoing message
Press buttons in order shown
Press the
Options
display shows ANS MACHINE.
Then
Press
OK
OK
MAKING LINK.
Press
Options
OPTIONS

ANS SET UP.

Press
OK
OK
MODE.
Press the
Options
display shows OUTGOING MSG.
Select
OK
OK
MSG.
Select
REC
REC
AFTER TONE. Voice says 'Please speak
after the tone then press save to confirm'.
Record your message. The display
BACK shows RECORDING. Press
the recording to delete what you have
recorded so far. Voice says 'Message
deleted' and the display reverts to
standby.
If you complete the recording and are
SAVE
happy with it, press
Voice says 'Your outgoing message is....'
Your message is played through.
The display shows OGM PLAY.
24
button until the
OPTIONS
. The display briefly shows
until the display shows
. The display shows ANSWER
button again, until
OPTIONS
. Display shows OUTGOING
. The display shows SPEAK
during
BACK
.
SAVE
To delete during playback, press
DEL
Voice says 'Message deleted. Your
outgoing message is ...' and the system's
pre-recorded message is played instead.
At the end the display returns to
standby.
To stop playback (ie you are happy
with it so far), press
STOP
message is retained. The display returns
to standby.
PLEASE NOTE
Deleting your recorded outgoing messages
will automatically reinstate the original
pre-recorded message.
It is not possible to delete any of the
pre-recorded messages.
.
DEL
. Your new
STOP