BT QUARTET 2015 User Manual page 15

To redial the last number
Using the redial button that is located
on the bottom left side of your handset:
Press the
REDIAL
Redial
number called appears in the display.
This allows you to check it before
dialling.
Press to dial the call.
TALK
An alternative way of doing this is:
Press , then the
TALK
The number is immediately dialled.
Redial
REDIAL will store the last 3 numbers
called.
Press the
REDIAL
Redial
number you wish to redial is displayed.
Press to dial.
TALK
To receive a call
When the phone rings:
The light on the handset flashes.
Display shows CALL. This occurs both
on and off the charger.
If the handset is in its charger:
Lift the handset and you are
immediately in contact with the caller.
To end the call, press the
or replace the handset in its charger.
button. The last
button.
REDIAL
button until the
button
TALK
If the handset is not in its charger:
Press the button.
TALK
If another registered user picks up the
call, an error tone sounds.
To end the call, press the
or replace the handset in its charger.
To switch on the keyguard
You may like to lock your keypad when
you are carrying it around. This stops
you from accidentally dialling any
numbers.
Press the left button (under the display)
followed by the
KEYGUARD ON.
If you now try to dial, display will show
KEYGUARD CANCEL. When you wish to
cancel the keyguard, press the left
button (under the display) followed by
the button.
button
TALK
button. Display shows
13