Recording Audio For Existing Photos - Epson PhotoPC 3000Z User Manual

6. The captured image is displayed on the LCD
monitor momentarily, and Rec Sound is
displayed at the right. To begin recording, press
the Rec Sound button. The camera begins
making the audio recording.
Note:
When making recordings while using the time lapse
feature, Rec Sound is not displayed and the camera
automatically records audio after the photo is taken.
7. A ten-second countdown is displayed on the
screen. You can record audio until the time runs
out by speaking into the built-in microphone on
the back of the camera. To stop recording before
ten seconds is up, press the Stop button.
Note:
When making recordings while using the time lapse
feature, Stop does not appear on the LCD monitor.

Recording audio for existing photos

To make audio recordings for previously taken
photos, follow these steps.
Note:
You cannot make an audio recording for existing video clips.
1. Set the dial switch to
2. Press the arrow icon buttons to select the image to
which you want to attach an audio recording. If a
photo already has an audio recording associated
with it, a microphone icon is displayed in the
upper-left corner of the photo.
3. Press the Menu Change button, then press the
Sound button.
4. To begin making the recording, press the Sound
Rec button. You can record audio until the time
runs out by speaking into the built-in microphone
on the back of the camera.
If there is already an audio recording associated
with the current photo, a confirmation message
appears. To erase the old recording and make a
new one, press Yes. Press No to cancel recording.
To stop recording before ten seconds is up, press
the Stop button.
Press the BACK button twice to exit.
5.
, then turn on the camera.
2-17
Taking Pictures
2