Epson PhotoPC 3000Z User Manual page 53

1. Set the dial switch to
2. Press the Menu Change button, then press the
SLIDE SHOW button.
3. Press the Sound button to turn the playback of
audio recordings on or off.
4. The slide interval setting is displayed on the LCD
monitor, directly below the sound setting. Press
the button next to the slide interval to change the
setting. You can choose between 3 Sec, 5 Sec,
Shuffle, and Manual.
Note:
If you choose Shuffle, the photo changes automatically
every three seconds.
5. To exclude certain photos from your slide show,
or to rotate certain photos, press the Settings
button. For details on excluding or adding photos,
refer to the next section. For details on rotating
photos, refer to "Rotating photos" on page 3-4.
, then turn on the camera. 6. When you are ready to begin the slide show, press
the Start button.
If you selected Manual as the slide interval in step
4, Rev and Fwd are displayed on the screen after
you press Start. Press the Rev button to view the
previous photo, or press the Fwd button to view
the next photo.
If you selected 3 Sec, 5 Sec, or Shuffle in step 4,
Quit and Pause are displayed on the screen after
you press Start. Press the Pause button to pause
the slide show. Press it again to restart the slide
show, or press the Rev or Fwd button to view the
previous or next photo. Press the Quit button to
cancel the slide show before it is finished.
7. Once the slide show is finished, press the BACK
button twice.
Excluding or adding photos
By default, all of the photos saved on the memory card
in your camera are automatically included in a slide
show. To exclude any of the photos from the slide
show, or to add any previously excluded photos to the
slide show, follow these steps.
1. Set the dial switch to
Viewing and Managing Your Images
, then turn on the camera.
3-3
3