Problems And Solutions; Camera Problems - Epson PhotoPC 3000Z User Manual

Problems and Solutions

Refer to this list of problems and possible solutions
before calling your dealer for help.

Camera problems

The following are problems that you may encounter
while using your camera.
The camera has no power.
The camera may have shut off automatically. To
turn the power back on, press the POWER button.
Alternatively, you can turn the camera back on by
pressing the shutter button, or pressing a button
on the back of the camera, depending on the
camera's dial switch position. See "Turning the
camera back on" on page 4-21 for more details.
Make sure that the batteries are installed
correctly. See "Installing the batteries" on page
1-7. Also, make sure that you are using
appropriate batteries and that they are charged.
See "Replacing the batteries" on page 1-8 and
replace the batteries if necessary.
The batteries included with the camera need to be
charged before use. See "Charging the batteries"
on page 1-6 to charge the batteries.
If you are using the AC adapter, make sure that it
is plugged into a working outlet.
You cannot see clearly through the viewfinder.
Adjust the diopter by turning the correction dial
next to the viewfinder. The dial switch must be set
to ; otherwise you will be unable to adjust the
diopter.
The camera does not take a picture when you press
the shutter button.
The flash may be recharging. Wait until the
indicator light beside the viewfinder turns green,
then try again.
Make sure that the memory card is installed
correctly. To install a memory card, see "Installing
and removing a CompactFlash Card" on page
1-13.
Maintenance and Troubleshooting
7
7-3