Confirming And Changing The Dpof File - Epson PhotoPC 3000Z User Manual

12. Press the right and left arrow icon buttons to
specify the number of copies of the index to print.
You can specify up to 99 index print copies.
13. Press the Save button. A confirmation screen
appears.
14. Press the Save button to save your settings. The
main menu of the Print Mark program appears.
If you want to change the current settings, press
the BACK button to return to the previous screen.
To change all or just selected photos are included
in your index print, return to step 5.
15. Press the Exit button to return to the program
selection menu.

Confirming and Changing the DPOF File

To confirm or change the current DPOF settings using
Print Mark, follow the steps below.
1. Set the dial switch to
2. Press the PrintMark button. The Print Mark main
menu is displayed.
5-6
Using Print Mark to Print Photos
and turn on the camera.
3. Press the Confirm button to show the
confirmation screen. The current DPOF settings
are displayed on the LCD monitor.
4. Press either the Change or the Confirm frame
button. Refer to the table below for details.
Button Result
Change Allows you to change and save the
settings using the same procedures
that you use to make new settings.
Confirm Allows you to confirm and change
frame which photos are selected and the
number of copies of each selected
photos that will be printed. Press the
left and right arrow icon buttons to
select a photo. The number of copies
of the photo that will be printed is
displayed.
Note:
You can enlarge the preview of the selected photo by
pressing the magnification icon button. Press the
BACK button to return to the normal selection screen.
5. Press the BACK button to return to the main menu
of the Print Mark program.
6. Press the Exit button to return to the program
selection menu.