Epson PhotoPC 3000Z User Manual page 99

Note:
The asterisks are substitutes for the respective digits of
the product number, which varies by country.
Read the AC adapter's documentation before using this
product.
w
Warning:
Only use the included AC adapter that is
designed for the PhotoPC 3000Z. Using another
adapter could cause fire, electrical shock, or
injury.
Do not use the AC power cable or the adapter for
any purpose other than powering your PhotoPC
3000Z.
If the AC plug does not fit your outlet, have a
proper outlet installed by a qualified electrician.
To avoid radiation danger, do not expose or
remove the ferrite core.
To prevent fire or electric shock, do not cover the
AC adapter with a blanket or similar covering
that could give off an electrical charge.
To avoid losing any images or settings, make sure that
the camera is finished processing and is turned off
before you connect or disconnect the AC adapter.
Then follow the steps below.
1. If your AC adapter has a separate AC power
cable, push the cable connector firmly into the AC
inlet.
2. Open the connector cover on the side of the
camera.
3. Plug the adapter cable into the DC port on the
camera.
Camera Options and Accessories
6
6-5