Epson PhotoPC 3000Z User Manual page 94

Message
Batteries are low.
Use AC adapter.
You cannot select
any more images.
You will lose the
last print settings.
Are you sure?
This camera
cannot use
existing DPOF file.
Unable to save
DPOF file.
Not enough
memory available
on card.
5-8
Using Print Mark to Print Photos
Explanation
The batteries are almost out of power.
Press the BACK button. Connect the AC
adapter to the camera.
Note:
If this message appears while making
the DPOF file, you will be unable to save
the new settings.
You have reached the maximum
number of photos that you can select
to print. Press the BACK button. If you
want to select more photos, cancel
some other selections.
A DPOF file is already saved on the
memory card. Press Cancel to quit
without overwriting the DPOF file. Press
Done to make a new DPOF file. The new
file replaces the old one. The memory
card only holds one DPOF file at a time.
This message appears when the Print
Mark program tries to read an invalid
DPOF file made by another camera.
Press the Delete and make new settings
button to delete the invalid file and
create a new file. Press the BACK
button to cancel the operation.
The memory card has insufficient
space to save the DPOF file. Press any
button to cancel the operation and
return to the program selection menu.
If you want to make a DPOF file, erase
some photos from the memory card
and try again.