Change Pin Code; Dial Mode - BT FREELANCE XD5500 User Manual

44 Base settings
IMPORTANT
If you change the base PIN, make sure
you keep a record of the new number.
You can use the space provided on
page 49.
If you experience any problems, please call the Helpline on 0870 605 8047* or email bt.helpdesk@suncorptech.com

Change PIN code

Some functions are protected by a 4 digit PIN code which
must be entered if you want to change the settings. The
default PIN is 0000.
1. Press , scroll
2. Scroll to
PIN CODE
3. Enter the current 4 digit PIN code (default: 0000) and
press .
4. Enter your new 4-digit PIN and press
5. Re-enter the new PIN again and press
To cancel at any time, press and hold the

Dial mode

Your BT Freelance XD 5500 is set to Tone dialling. In the UK,
you should only need to change this if connected to an older
type of switchboard/PBX which requires Pulse dialling.
1. Press , scroll
2. Scroll to
DIAL MODE
3. Press or
4. Press and hold
to and press
SETUP
and press .
to and press
SETUP
and press .
to select or
TONE PULSE
to return to the standby screen.
.
.
to confirm.
button.
.
and press .