Maintenance - Bowflex REVOLUTION Owner's Manual

8

Maintenance

To store your machine, you can either leave it in the fully assembled, extended position, or you can raise the seat
rail system to make a smaller footprint for storing. To raise the seat rail system, pull the pop pin on the lower seat
rail at the leg extension assembly and use the handle to lift the seat rail assembly into place.
Preventative Maintenance
Keeping your machine in good repair takes a minimal amount of time, and will ensure you have many years of use.
In addition to preventative maintenance such as checking to make sure the unit is clean and free from defects,
wiping down surfaces, and keeping attachments in a secure location, maintenance should be limited.
Daily
Wipe down with a damp cloth. Pay special attention to areas where perspiration could settle.
Monthly
Inspect the unit for loose parts, nuts, bolts, etc. Inspect ropes and straps for fraying or excessive wear.
Yearly
Remove the Top Cover and inspect the condition of the internal components.
Look for fraying or excessive wear on straps, ropes, and moving parts, and replace as necessary.