Bowens ESTIME 3000 Operating Instrctions page 11

In Use In Use
1
Control
• The following two diagrams illustrate examples of the result of asymmetric power selection.
1
1
In Use
2 3
Control
Control
2 3
2 3
- 11 -
3000 AMF WITH THREE FLASH HEADS IN
N0S.1,2 & 3 SOCKETS
a) Socket 1,2 & 3 power indication illuminated.
b) Sections 1,2 & 3 Up-Down buttons control their
own sections separately.
c) Full output of 1000 Watt seconds available from
each flash head
d) Power to each flash head may be reduced
independently in 1/3rd 'f' stop steps over 3 'f' stops
to 1/8th power.
3000 AMF WITH TWO FLASH HEADS IN N0S.
2 & 3 SOCKET
a) N0.2 output set to half power.
N0.3 output set to 1/4 power.
b) N0.2 output:- half 1000 = 500 Watt seconds
N0.3 output:- quarter 1000 = 250 Watt seconds.
c) N0 2 one 'f' stop greater than N0.3
i.e. light ratio 2:1
ASYMMETRIC OUTPUT
3000 AMF WITH TWO FLASH HEADS IN N0S.
1 & 3 SOCKET
a) N0.1 output set to full power.
N0.3 output set to 1/2 power.
b) N0.1 output:- 2000 Watt seconds.
N0.3 output:- half 1000 = 500 Watt seconds.
c) N0 1 output two 'f' stop greater than N0.3
i.e. light ratio 4:1
ASYMMETRIC OUTPUT
7
8
9