Bowens ESTIME 3000 Operating Instrctions page 14

In Use In Use
Control
• The following two diagrams illustrate examples of the result of power selection.
3000 SC WITH THREE FLASH HEADS IN
N0S.1,2 & 3 SOCKETS
a) Power indication illuminated.
b) Up-Down buttons control power to ALL three
sockets.
c) Full output of 1000 Watt seconds available from
In Use
each flash head reducing in 1/3rd 'f' stop steps
over 3 'f' stops to 1/8th power. SYMMETRICAL
OUTPUT.
3000 SC WITH TWO FLASH HEADS IN N0S.
2 & 3 SOCKET
a) Output set to half power.
b) N0.2 output:- half 1000 = 500 Watt seconds
N0.3 output:- half 1000 = 500 Watt seconds.
c) N0 2 output equal power to N0.3
i.e. light ratio 1:1
SYMMETRIC OUTPUT
3000 SC WITH TWO FLASH HEADS IN N0S.
1 & 3 SOCKET
a) Output set to 1/2 power.
b) N0.1 output:- half 2000 = 1000 Watt seconds.
N0.3 output:- half 1000 = 500 Watt seconds.
c) N0 1 output one 'f' stop greater than N0.3
i.e. light ratio 2:1
ASYMMETRIC OUTPUT
- 14 -
16
17
18