GMC 18VDT18V Instruction Manual page 18

c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed.
operations different from those intended could result in a
hazardous situation.
5. Battery tool use and care
a. Ensure the switch is in the off position before
inserting battery pack. Inserting the battery pack into
power tools that have the switch on invites accidents.
b. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
c. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
Properly
Use of the power tool for
d. When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to
Shorting the battery terminals together may cause burns
or a fire.
e. Under abusive conditions, liquid may be ejected
from the battery; avoid contact.
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
Additional safety instructions for remote
controlled cars/trucks
WARNING.
Do not plug the battery charger into the mains
or install the battery into the truck until you have carefully
read and understood this instruction manual.
WARNING. Never leave the battery pack in the truck when
it is not in use and always switch OFF the truck after each
use and/or when making any adjustments. This will help
prevent the truck from starting accidentally and reduce any
risk of injury.
WARNING. Choking hazard. This product contains small
components and is not suitable for children under 3 years
of age.
• Use only 18V batteries specifically designed for
this car/truck.
• Use only 9V Alkaline batteries in the remote control.
• Remove the battery pack from the truck and the 9V
battery from the transmitter after use. These actions
will reduce the risk of use by unauthorized persons and
reduce the possibility of battery leakage.
• The tool must be used only for its prescribed purpose.
5
another.
If contact accidentally
This