Related Manuals for GMC 183T
Summary of Contents for GMC 183T
- Page 1 INSTRUCTION MANUAL Cordless Drill/Driver Drill/Driver • Melbourne • Perth • Auckland • Hong Kong • Shanghai • Taipei • New York • Verona • London • Paris 443T, 243T, 183T, GTX12100K, 183T, GTX12100K, GTX144100K 050502 ED9 JJ...
-
Page 2: Table Of Contents
Unpacking Fitting and removing the battery pack Battery charging To obtain the best life for the battery Battery indicator LED Work area light Using the drill Forward/reverse switch Adjustable torque Inserting and removing bits Adjustable side handle Drilling Chuck replacement... -
Page 3: Description Of Symbols
Dear Customer If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. -
Page 4: Specifications
Keep children and bystanders away while operating a • power tool. Distractions can cause you to lose control. GTX144100K 183T 443T 14.4V 230–240V ~ 50Hz, 1.2A 2230–240V ~ 50Hz, 1.2A 230–240V ~ 50Hz, 1.2A 3-5 Hours 3-5 Hours 0–550min... - Page 5 Personal safety • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
-
Page 6: Additional Safety Instructions For Drills
Ensure that the lighting is adequate. • Do not put pressure on the drill, such that it slows the motor down. Allow the drill bit to cut without pressure. You will get better results and you will be taking better care of your tool. -
Page 7: Additional Safety Instructions For The Battery Pack
• To allow the battery pack to cool down after charging, do not place it in a hot environment such as a metal shed or open trailer left in the sun. • The charger is not intended for any use other than charging the exact type of rechargeable battery pack as supplied with the charger.Any other use may result in the risk of fire, electric shock or electrocution. -
Page 8: Know Your Product
Know your product This drill is mainly used for drilling in wood or metal sheet and screwdriving. Use the tool and accessories only for intended applications. All other applications are expressly ruled out. 1. Keyless chuck 2. Torque collar 3. Trigger with variable speed control 4. -
Page 9: Unpacking
Failure to do so could result in serious personal injury. Fitting and removing the battery pack To remove the battery pack from the drill firmly press the battery release tabs (7) at either side of the battery pack, and slide the battery backward out of the tool. -
Page 10: Led Work Area Light
Inserting and removing bits This drill has a keyless chuck, which means that a chuck key is not needed to secure a bit in the drill. 1. Open the chuck by holding... -
Page 11: Adjustable Side Handle
4. To remove the drill bit, hold the rear section of the chuck firmly and rotate sharply the front section of the chuck in a anti-clockwise direction, sufficiently enough to allow the drill bit to be removed. Adjustable side handle 1. - Page 12 Carefully read the entire Instruction Manual Before returning this product for a Warranty Claim or any other reason Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand) When you make your call, please have the following information at hand: •...