Introduction; Environmental Protection; Description Of Symbols; Specifications - GMC 18VDT18V Instruction Manual

is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or
0800 445 721 in New Zealand.

Introduction

Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.

Environmental protection

Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.

Description of symbols

The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant safety standards.
For indoor use only.
Isolating transformer.
Double insulated for additional protection.
Conforms to relevant standards
for electromagnetic compatibility.
Waste electrical products should not be disposed of
with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for
recycling advice.
Read the instruction manual.
130˚C
Fusable link rated at 130°C.
Polarities of DC connector.
Cadmium contained battery should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authority or
retailer for recycling advice.

Specifications

Charger Input:
Operational frequency
Radio Controller Battery:
Nominal battery voltage:
Charging time:
Tool weight:
Power <1W EIRP in accordance with LIPD Class Licence
3
230–240V ~ 50 Hz
27.145MHz
9V Alkaline
18V
5–7 hours
1.3kg