Setting The Time Delay Function; Setting The Minute Minder - AEG BS7304001 User Manual

flashes in the display.
3. Use
firm.
4. When the set time ends, an acoustic signal operates for two minutes.
symbol and time setting flash in the display. The appliance deactivates.
5. Touch any sensor field or open the oven door to stop an acoustic signal.
6. Deactivate the appliance.
Setting the SET+GO
To start of the appliance with necessary settings with only one touch of the sensor field,
any time later.
1. Set an oven function (or programme) and temperature (refer to "Setting the oven func-
tion" and "Changing the oven temperature").
2. Set DURATION (refer to "Setting the DURATION").
3. Touch
4. Touch
The display shows
ted.
5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function.
You can use SET+GO function only if DURATION is set.
Check result (selected models only)
If you set END or DURATION function, 2 minutes before end of cooking an acoustic signal
sounds and lamp activates. The appliance goes to the setting of the END or DURATION
function. During these two minutes you can examine the cooking results and, if necessary,
add END or DURATION time.

Setting the Time delay function

DURATION
and off automatically later. In this case first set DURATION
(refer to "Setting the DURATION" and "Setting the END ").
When the Time delay function is activated the display shows static symbol of the oven
function,
Residual heat display.

Setting the MINUTE MINDER

Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no
effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the
appliance is off.
1. Touch
and "00" flash in the display.
or to set END (first you set minutes and then hours) and
again and again until
to set the SET+GO function.
and
and END can be used at the same time, if the oven is to be switched on
with a dot and . The dot shows which clock function is on in the Clock/
.
will flash in the display.
with a dot. This dot shows which clock function is activa-
Clock functions
or
and then END function
17
to con-