Connecting Automatically - Becker TRAFFIC ASSIST 7977 Instructions For Use Manual

Option Description
The device data is dis-
Show details
played.
The device is protected
Protect this
against automatic dele-
entry
tion (only available on
unprotected devices).
Device protection is disa-
Unprotect
bled (only available on
this entry
protected devices).
The device is moved for-
Move this en-
ward by one position
try up
(only available on pro-
tected devices).
The device is moved
Move this en-
back by one position (on-
try down
ly available on protected
devices).
The device is deleted
Delete this
from the device list.
entry
Option Description
All devices (including the
Delete list
protected ones) are delet-
ed from the list.
*Applies only to the Bluetooth®-enabled Traffic Assist 7977
TELEPHONE MODE*

Connecting automatically

After switching on, your Traffic Assist
tries to establish a connection with the last
mobile phone connected.
You can activate or deactivate this func-
tion as described under "Activating/deac-
tivating automatic connection" on page
82.
The prerequisites for a successful connec-
tion are as follows:
• Bluetooth® is activated on your Traffic
Assist (See "Telephone/Bluetooth set-
tings" on page 81.).
• The mobile phone is switched on and in
range and Bluetooth® is activated.
>>>
> EN
79