Table of Contents
Advertisement
8. SWITCHING THE MODE (DISPLAY FUNCTION)
This watch is equipped with four modes consisting of time/calendar, chronograph,
local time and alarm. Since the mode changes when the crown is turned, the
current mode can be confirmed with the mode hand.
9. HAND O-POSITION CHECK AND CORRECTION
Before using this watch, check that the functions of the watch operate properly
by performing the following procedure.
O-Position: This refers to the base position of each hand that enables the watch
to function properly.
[0-Position Check]
1. Turn, the crown to switch the watch to the chronograph [CHR] mode.
2. Pull the crown out to Position 1 to check the 0-position (function hand and
date wheel correction mode.) Confirm that the 24-hour hand, hour hand, minute
hand, second hand and function hand rapidly advance to the 0 position, and the
date wheel displays " 1 ".
.
[0-Position Correction]
O-Position Correction of Function Hand and Date Wheel:
1. Pull the crown out to Position 1 in the chronograph [CHR] mode to correct the
function hand and date wheel.
2. Click (turn) the crown to the left to align the date wheel.
(1) Clicking the crown once causes the function hand to make four revolutions and
the date to be corrected by one day.
(2) Turning the crown rapidly (clicking continuously two or more times) causes
the function hand to advance continuously. When stopping the functions hand,
click the crown once to the right or left. When the function hand is not stopped
manually, it stops automatically after advancing 31 days.
The 12:00 position immediately after the date changes to the "1st" in the 0
position of the function hand. After correcting the date wheel to the "31st" by
turning the crown, press button (A) to finely correct the function hand so that
the function hand is aligned at the 0 position after the date wheel changes to
the " 1st".
Return to Table of Contents
0 Positions of each Hand (Base Positions)
24-hour hand: 24:00
Hour hand, minute hand: 00:00
Second hand: 00 seconds
Function hand: 0 position (12:00 position)
Date wheel: 1st
Perform the "0-Position Correction" when
the hands and date wheel are not at the
positions indicated above
Return to Table of Contents
Hide quick links:
Advertisement
Table of Contents
