Volvo V70 Owner's Manual page 269

NOTE
•
The list only shows the frequencies of
stations that are currently being
received, not a complete list of all
radio frequencies on the selected
wavelength.
•
If the signal from the currently received
station is weak, this may prevent the
radio from updating the station list. If
this occurs, press the
(while the station list is shown in the
display screen) in order to change to
manual tuning and set a frequency. If
the station list is no longer shown, turn
TUNE one step in either direction to
show the list again, and press
switch.
The list disappears from the screen after a
few seconds.
If the station list is no longer shown, turn
TUNE one step in either direction and press
the button in the centre console to
change to manual tuning (or to return from
manual tuning to the function for "Station
list").
Manual tuning
The preset from the factory is that the radio
shows the station list of the strongest stations
in the area when you turn TUNE (see the sec-
tion "Station list", page 266). When the sta-
tion list is shown, press the
the centre console to change to manual tun-
ing. This allows you to select a frequency
from the list of all available radio frequencies
in the selected wavelength. In other words, if
button
turn TUNE one step in a manual search the
frequency is changed from e.g. 93.3 to
93.4 MHz, etc.
To manually select a station:
1. Press the RADIO button, turn TUNE until
to
the desired wavelength (e.g.
shown, press OK/MENU.
2. Turn TUNE to select a frequency.
06 Infotainment system
NOTE
The preset from the factory is that the
radio automatically searches for the sta-
tions in the area where you are driving (see
previous section "Station list" above).
button in
But if you have changed over to manual
tuning (by pressing the
centre console when the station list was
shown), then the radio remains set in the
function for manual tuning the next time
you switch on the radio. To change back
to the function for "Station list", turn TUNE
one step (to show the complete list of sta-
tions) and press the button
Note that if you press
tion list is not shown then INFO is acti-
FM1
) is
vated. For more information on this func-
tion, see page 255.
Preset
10 presets can be stored per wavelength (e.g.
FM1 ).
The stored presets are selected using the
preset buttons.
1. Tune into a station (see "Tuning", page
266).
2. Hold in one of the preset buttons for a
few seconds, the sound disappears dur-
Radio
button in the
.
when the sta-
06
267