04 Driver support
Park assist camera*
Cars with reversing sensors*
04
Coloured areas (x 4, one per sensor) show dis-
tance.
If the car is also equipped with parking assis-
tance sensors (see page 197) the distance
indication will be more precise and the col-
oured areas show which of the 4 sensors
is/are registering an obstacle.
The colour of the areas changes with
decreasing distance to the obstacle - from
yellow to orange to red.
Colour / paint
Distance (metres)
Yellow
Orange
Red
*
202
Option/accessory, for more information, see Introduction.
Settings
Press OK/MENU when a camera view is
shown. Make the settings as desired.
Miscellaneous
•
The default setting is that the camera is
activated when reverse gear is engaged.
•
One press on CAM activates the camera
even if reverse gear is not engaged.
•
If the car has several cameras* installed
then cameras are alternated between by
pressing CAM or turning TUNE.
Limitations
NOTE
A bike carrier or other accessory mounted
on the rear of the car could obscure the
camera's view.
Pay attention to the possibility that, even if it
only looks like a relatively small part of the
image is obscured, it could be a relatively
large sector that is hidden from view. Obsta-
cles could thereby go undetected until they
are very close to the car.
1,5–
0,3–1,5
0–0,3
To bear in mind
•
Keep the camera lens free from dirt, ice
and snow.
•
Clean the camera lens regularly with luke-
warm water and car shampoo - take care
not to scratch the lens.