PERIODIC MAINTENANCE AND MINOR REPAIR
1. Brake light switch
2. Adjusting nut
Brake light switch adjustment
The rear brake light switch is activated
by the brake pedal and is properly ad-
6
justed when the brake light comes on
just before braking takes effect. Adjust
the brake light switch as follows.
1. Remove panel A. (See page 6-5
for panel removal and installation
procedures.)
2. Hold the switch body so it does not
rotate while turning the adjusting
nut.
3. Turn
the
direction a to make the brake
light come on earlier.
Turn
the
direction b to make the brake
light come on later.
EAU01756
adjusting
nut
in
Front
adjusting
nut
in
1. Wear indicator ( 2)
Checking the front and rear
brake pads
A wear indicator is provided on each
brake. This indicator allows checking of
brake pad wear without disassembling
the brake. Apply the brake and inspect
the wear indicator. If the indicator is
ALMOST in contact with the disc plate,
ask a Yamaha dealer to replace the
pads.
6-17
Rear
EAU00715