1. Projection
2. Seat holder
To install
Insert the projection on the front of the
seat into the holder, then push down
the seat.
NOTE:
@
Make sure that the seat is securely fit-
ted.
@
INSTRUMENT AND CONTROL FUNCTIONS
1. Open
Helmet holder
To open the helmet holder, insert the
key in the lock and turn it as shown.
To lock the helmet holder, replace the
holder in its original position.
WARNING
@
Never ride with a helmet in the hel-
met holder. The helmet may hit ob-
jects, causing loss of control and
possibly an accident.
@
3-12
1. U-LOCK
2. Strap ( 2)
EAU00260
Storage compartment
This compartment is designed to store
a genuine Yamaha U-LOCK. (Other
locks may not fit.) Be sure the lock is
fastened securely with the straps when
EW000030
storing it in the compartment.
To prevent losing the straps, be sure to
secure them even when a U-LOCK is
not being stored in the compartment.
When storing this Owner's manual or
other documents in the compartment,
be sure to put them in a vinyl bag so
they do not get wet. When washing the
motorcycle, be careful not to flood this
compartment with water.
3
EAU01688