INSTRUMENT AND CONTROL FUNCTIONS
3
1. Spring preload adjusting bolt
Front fork adjustment
This front fork is equipped with spring
preload adjusting bolts.
WARNING
@
Each fork leg must be set to the
same pressure. Uneven setting can
cause poor handling and loss of sta-
bility.
@
Adjust spring preload as follows.
Turn the adjusting bolts in direction a
to increase spring preload and in direc-
tion b to decrease spring preload.
1. Setting
2. Front fork cap bolt
EAU00285
CAUTION:
@
The grooves are provided to show
EW000037
the adjustment level. Always keep
the adjustment level equal on both
fork legs.
@
CI-18E
Hard
Adjusting
1
2
position
1. Upper adjusting ring
2. Lower adjusting ring
EC000013
Rear shock absorber
adjustment
The shock absorbers are equipped
with spring preload adjusting rings.
To increase spring preload, turn the ad-
justing rings as shown in illustration
Stan-
Soft
dard
3
4
5
6
7
3-13
EAU01783
a
.