Replacing The Headlight Bulb - Yamaha XJ6N Owner's Manual

Replacing the headlight bulb

This model is equipped with a quartz
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
G Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU46811
ECA10650
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit side
covers by removing the bolts on
each side.
1
2 2
1. Headlight unit side cover
2. Bolt
2. Remove the multi-function meter
1
1. Multi-function meter unit
2. Bolt
1
1. Projection
2. Slot
6-36
unit bolts, and then lift up the meter
to unhook its projections from the
slots in the meter stay.
2
6
1
2