Helmet Holder; Storage Compartment - Yamaha XJ6N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

2
1
3
1. Helmet holder
2. Owner's tool kit
3. Helmet holding cable
The helmet holder is located under the
seat. A helmet holding cable is provid-
ed in the owner's tool kit to secure a
helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Remove the seat. (See page
3-18.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loops over the helmet hold-
er.
EAU46751
1
3
1. Helmet
2. Helmet holding cable
3. Helmet holder
3. Place the helmet on the right side
of the vehicle, and then install the
seat. WARNING! Never ride with
a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
To release the helmet from the hel-
met holder
Remove the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then install the
seat.
3-19

Storage compartment

2 3
1. Storage compartment
The storage compartment is located
under the seat. (See page 3-18.)
When storing the Owner's Manual or
other documents in the storage com-
partment, be sure to wrap them in a
plastic bag so that they will not get wet.
When washing the vehicle, be careful
[EWA10161]
not to let any water enter the storage
compartment.
G
1
WARNING
Do not exceed the load limit of 3
kg (7 lb) for the storage com-
partment.
EAU14453
EWA10961