PERIODIC MAINTENANCE AND MINOR REPAIR
Rear wheel removal
WARNING
@
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so there is no danger of it
falling over.
@
1. Place the motorcycle on the cen-
terstand.
6
EAU01116*
EW000122
1. Adjusting nut
2. Brake rod
3. Brake torque rod
4. Cotter pin
2. Remove the cotter pin and nut.
Then remove the brake torque rod
bolt from the brake shoe plate.
3. Remove the brake adjusting nut
and brake rod from the brake cam
lever.
1. Axle nut
2. Chain adjusting plate
4. Loosen the chain adjusting plates
5. Remove the axle nut.
6. Pull out the rear axle.
7. Push the wheel forward and re-
8. Remove the wheel assembly.
6-32
on each side.
move the drive chain.