Cleaning And Care; Outside Of The Appliance; Oven Interior; Accessories - Electrolux EOB6636 User Information

Cleaning and care

1
Warning: For cleaning, the appliance must be switched off and cooled
down.
Warning: For safety reasons, do not clean the appliance with steam jet or
high-pressure cleaning equipment.
Important: Do not use any abrasive cleaners, sharp scrapers or abra-
sive items.

Outside of the appliance

• Wipe the front of the appliance with a soft cloth and a solution of washing-
up liquid and warm water.
• With metal fronts use the cleaners that are commercially available.

Oven Interior

Oven lighting
You can switch on the oven light to make cleaning easier.
Cleaning
The walls that have a catalytic coating are self-cleaning. They absorb
splashes of fat while the oven is in use.
To support this self-cleaning process, we recommend heating the oven
without any food at regular intervals.
1. Remove all slide-in items from the oven.
2. Wash the oven floor with warm water and washing up liquid, then dry it.
3. Set the oven temperature to 250 °C.
4. Switch the oven off after one hour.
5. When the oven has cooled but is not cold, wipe off any remaining soiling
with a soft damp sponge.
1
Important! Do not use oven sprays or abrasive cleaners. Do not use soap
or other cleaning agents. Doing so can damage the catalytic surface.
3
Over time the catalytic coating can discolour slightly. This does not affect its
catalytic properties.

Accessories

Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after
each use and dry well. Soak briefly to make them easier to clean.
30