AEG FM4800TYAN User Manual page 29

8. Place Frontline strips on the appliances. Check that the Frontline strips are in line
with one another.
9. Tighten the fixing plate / retaining grip screws.
10. Inject a line of silicon into the gap between the appliances.
11. Dampen silicon line with a little soapy water.
12. Press rubber block hard against the glass ceramic and draw it slowly along the
gap.
13. Leave silicon until the next day to harden.
14. Carefully remove projecting silicon with a shaving blade.
15. Clean glass ceramic thoroughly.
16. Replace Frontline strips.
Installing more than one Frontline hob 29