What To Do If - AEG FM4800TYAN User Manual

Aeg induction teppan yaki
Hide thumbs Also See for FM4800TYAN:
Table of Contents

Advertisement

20

What to do if ...

What to do if ...
The Teppan Yaki cannot be
switched on or is not operat-
ing
The residual heat indicator is
not displaying anything.
and number are displayed
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
Problem
More than 10 seconds have
passed since the appliance was
switched on
The child safety device is
switched on
Several sensor fields were
touched at the same time
Automatic switch-off has
been triggered
The cooking zone was only on
for a short time and is not yet
hot
Electronics fault
Possible cause
Remedy
Switch the appliance on again.
Deactivate child safety device
(See the section "Child safety
device")
Only touch one sensor field
Remove any objects (pan,
cloths, etc.) that are lying on
the control panel. Switch ap-
pliance on again
If the cooking zone is sup-
posed to be hot, contact your
local service centre.
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house's wiring system)
If after switching on again,
is displayed again, call the cus-
tomer service department

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fm 6800tyan

Table of Contents