Before Using For The First Time; Setting The Time; Initial Cleaning - Electrolux EOB 6630 Operating Instructions Manual

Before Using for the first time

Setting the Time

3
The oven will only function if the time is set.
The set time function indicator will flash
after the appliance has been connected
to the mains or following a power failure.
Use the + or - buttons to set the current
time.
After approx. 5 seconds the function in-
dicator will stop flashing and the clock
will show the set time.
The appliance is ready for use.

Initial Cleaning

Before using the oven for the first time you should clean it thoroughly.
1
Caution: Do not use any caustic, abrasive cleaners! The surface could be
damaged.
3
To clean metal fronts use commercially available cleaning agents.
1.Turn the oven function switch to oven lighting L.
2.Remove all accessories and the shelf support rails and wash them with
warm water and washing up liquid.
3.Then wash out the oven with warm water and washing-up liquid, and dry.
4.Wipe the front of the appliance with a damp cloth.
9