iDect X1i System User Manual page 68

Color profile: Generic CMYK printer profile
Composite Default screen
Clean the battery charging contacts on the base unit
with a dry cloth.
Check the connections between the base unit and the
mains power socket.
"I try to You need to replace the batteries. To find out how to
recharge the obtain replacements, call 0845 345 9677, between
batteries, but I 9.00 am and 5.00 pm, Monday to Friday.
still get a
Dispose of used batteries safely — never burn them,
warning that
or put them where they could get punctured.
they are low."
ALWAYS use the batteries supplied with your iDECT X1i
— other batteries may burst, causing damage.
PBX use
"The Recall You may need to change the recall signal length from
function doesn't its default of 100 ms. Consult your PBX documentation
for help if necessary. To change the recall setting, use
seem to work."
the BASE SETTING
"Last Number When you first make a call, after keying in the outside
Redial and/or line access code (e.g. 9), press and hold the
Number Redial button until a
memory dialling
display. This inserts a pause between the access code
don't work on
and the telephone number. You should later be able to
a PBX."
redial the number.
When storing numbers in memory, you can include the
outside line access code (e.g. 9) with each number.
If your PBX requires you to wait for a second Dial tone
before dialling the telephone number, press and hold
the Last Number Redial button for a pause
between the access code and the number.
Help Line: 0845 345 9677
(Local Call rate)
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:07
Troubleshooting
menu (page 52).
Last
P
appears on the
65