Playing Your Messages - iDect X1i System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen

Playing your messages

When the machine is switched on, and OGM1 is
selected, it will record messages from callers (incoming
messages).
To play back your incoming messages (and memos if
applicable):
Press the MENU button then the â button
1
FOUR times
è
The display shows
2 Press the PHONE/OK button TWICE
è
If you have new messages, they will be
played back. If you have no new messages, any
old messages will be played back. If you have
no messages at all, the display will show
NO MESSAGES!
During playback, the display shows:
n
the message number —
n the time and date of the call
If you subscribe to Caller Display (page 20),
you can press the â or á button to switch the
display between the time/date and the caller's
number (if the number is available). If the caller's
number is stored in your handset's Phone Book,
the name may be shown instead of the number.
If time stamping is turned on (page 38), the
machine will also tell you the time and date of
the call before playing the message.
è
After all new messages (or all old messages)
have been played back, the display shows
END OF MESSAGE
to the TAM OPERATION
See overleaf for functions you can use during message
playback.
34
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:02
TAM OPERATION
ICM #1
etc
for 2 seconds, then goes back
menu.