Returning To Default Settings; Dialling Type And Recall Signal - iDect X1i System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
Ringer volume These are set using the
page 13 for details.
and melody
Time & day See page 10 for details.
Returning to The default settings for the base unit are:
default
■ Ringer volume level —
settings
■ Ringer melody —
■ Time and day —
■ Dialling mode —
■ Recall (flash) length —
■ Base unit PIN —
OFF
■ Call Barring —
■ Emergency numbers —
To return all base unit settings to their defaults:
1 Select the
pressing the PHONE/OK button
è
The display shows
SETTING?
2 Press the PHONE/OK button to confirm, or
the HANG UP button to cancel
è
The display shows
Dialling type The next option in the Base Setting menu is
TONE - 100MS
and recall . This is for setting the dialling type and
signal the recall (flash) signal length, and you probably won't
ever need this option.
You should always leave the dialling type at its
default setting —
the recall signal setting unless you're having problems
using your iDECT X1i on a PBX. Refer to page 65 for
more information.
52
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:05
Base unit settings
ACOUSTIC SETTING option. See
2
3
00:00 SUN
TONE
100MS
0000
999 and 112
DEFAULT SETTING option by
CONFIRM DEFAULT
DEFAULT SETTING DONE
LINE SET
TONE
. You should not need to change