iDect X1i System User Manual page 67

Color profile: Generic CMYK printer profile
Composite Default screen
Troubleshooting
Using a multi-handset system
"I can't transfer Make sure the other handset is in range of the base unit.
a call."
Make sure you're dialling the correct number for the
other handset (1 to 6, or Ø for all registered handsets).
The answering machine
"The machine Make sure the answering machine is switched on.
won't record
The machine's memory may be full. Delete some
messages."
messages to make room for new ones.
Check that outgoing message OGM1 is selected; with
OGM2 selected, callers can't leave messages.
"I can't switch The machine's memory may be full. Delete some or all
the machine recorded messages (see page 36), then try again to
on." switch on.
Use the á or â button on the handset, to adjust the
"I can't hear my
messages being volume in the earpiece or speakerphone.
played back."
"Remote Make sure you're using the correct remote PIN
operation (page 41).
doesn't work."
Check that you're using a tone-dialling phone. Some
cordless or mobile phones don't generate continuous
tones, so aren't suitable for remote operation.
Batteries
"The handset's Before you first used the handset, you should have left it
on the base unit or charger pod for up to 15 hours to
batteries are
charge the batteries fully.
running low
within an
You may need to replace the batteries (see below).
hour or two."
64
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:07