To Check Your Messages Remotely; Switching On Remotely - iDect X1i System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen
1
To check Using a tone dialling phone, dial your home number
your
2
When your outgoing message starts playing,
messages
press then key in your remote PIN
remotely
è
You hear one long 'beep'. The machine tells you
how many messages you have, and how many new
messages.
If you have new messages, playback will start
automatically; or you can go to step 4 —
4
Press to play back all your messages
and/or use the keys listed on page 46
Notes ■ At steps 2 and 3, you must press a key within
10 seconds, or the machine will cut off your call.
■ At step 2, if you key in the wrong PIN, you can try
again. You have up to three attempts to get the code
right before the machine cuts off your call.
■ After about 2½ minutes playback, the machine will
pause and you'll hear a tone (short 'beeps'). To continue
playback, press any key within 10 seconds. If you
don't press a key, your call will be cut off.
■
You'll hear voice prompts to help you during remote
operation
Switching on If the answering machine is switched off, it will answer
remotely your call after 10 rings. To switch it on remotely:
When you hear ' Security code', key in your
1
remote PIN
2 Press to switch on
42
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:04
Remote operation