iDect X1i System User Manual page 10

Color profile: Generic CMYK printer profile
Composite Default screen
7
Charge the batteries for 15 hours
Before you use the handset for the
first time, it's important to charge the
batteries fully.
The handset 'beeps' when it's correctly
in position on the charging cradle.
Leave the handset on the charging
cradle for 15 hours.
8
Connect the base unit to the telephone line
Switch off power at the mains socket
Insert the telephone line plug into
the socket as shown
Switch mains power back on
Make sure the mains socket is
switched on if you want to use
the phone — it will not work
without electrical power
The navigation buttons
In the instructions, these buttons are
represented by arrows, as shown here.
Help Line: 0845 345 9677
(Local Call rate)
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:53:55
Installation and set-up
The 'battery
charge level'
symbol blinks
Use the plug to
raise the shutter
before pushing
it into the socket
NOTE: the charger pod does not have
a connection to the telephone line.
UP
LEFT RIGHT
DOWN
7