iDect X1i System User Manual page 4

Color profile: Generic CMYK printer profile
Composite Default screen
Symbols on the display
18:44 WED
The time and date
JANE
The handset's name
HANDSET
(the default is )
The duration of each call is shown on the display from 5 seconds
after you press the PHONE button for a line, until 10 seconds
after you end the call.
What the symbols mean
Signal This is on steadily when there's a radio link between the handset
level and base unit. It f lashes while the handset is trying to establish a
link to the base unit .
If this symbol flashes while you're on a call, move closer to
the base unit .
Flashes while your handset is ringing for an intercom call, and
Intercom
comes on steadily when the call's connected.
call
Speakerphone Appears when the speakerphone is turned on.
Appears when you have a connection to the outside line.
Phone
Flashes when there's an incoming call to be answered
(even if the ringer is turned off).
Appears when you have missed incoming calls (if you
New call
subscribe to Caller Display).
Memory/
Comes on when you're storing numbers in memory, and when
store
you're making calls to stored numbers.
Battery
When this shows 'nearly empty' (
charge the base unit or charger pod as soon as possible, to charge
level the batteries.
While the batteries are being charged, the symbol blinks.
Help Line: 0845 345 9677
(Local Call rate)
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:53:48
The handset's number (if you
1
have more than one handset on
your iDECT X1 system)
), put the handset on
1