Baby Call; To Set Or Change The Baby Call Number; To Turn Baby Call On And Off - iDect X1i System User Manual

Color profile: Generic CMYK printer profile
Composite Default screen

Baby Call

With Baby Call (babysitter's call) turned on, the handset
will automatically dial a specified number when any
button (except MENU) is pressed. Before you can turn
Baby Call on, you must set (programme) the Baby Call
phone number to be dialled.
With Baby Call turned on, the iDECT X1i handset
!
can't be used for calling Emergency Services. Make
sure there's an alternative phone available for
emergencies.
To set or 1 Select the
change the pressing the PHONE/OK button
Baby Call è
The display shows
number
2 Key in the phone number then press the
PHONE/OK button
è
The display goes back to standby mode.
To turn Baby 1 Select the
Call on and off PHONE/OK button
è
The display shows
OFF
or
Use the â or á button to go to the option
2
you prefer, then press the PHONE/OK
button to confirm
è
The display goes back to standby mode,
with BABY MODE
If you try to turn Baby Call on before you've set
a Baby Call number, the display will show
ENTER BABY NUMBER *
number in.
Your handset's See page 9.
name
50
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:05
Handset settings
BABY CALL NUMBER option by
ENTER BABY NUMBER *
BABY MODE option by pressing the
SET BABY MODE and ON
shown on the middle line.
and you'll need to key a