Vantec NST-400MX-53 User Manual page 9

(4) Secure the hard drive onto
the drive caddy with the
provided screws.
(5) Choose the Mode Configuration
for the NexStar MX. Connect the
power adapter and power on the
unit. Press the reset button and
hold for 10-15 seconds.
*Please note, changing mode will
erase all data on the drives in this
400MX enclosure. Please backup
any important data before you
continue. For Mode Configuration
details, see page 10.
(6) Insert the drive caddy back into
the aluminum housing. Be sure to
align and secure with the provided
screws.
( figure 5.1-F )
( figure 5.1-D )
( figure 5.1-E )
Installation
( figure 5.1-D)
( figure 5.1-E)
( figure 5.1-F)
7