Vantec NST-400MX-53 User Manual page 14

RAID 0 Mode (Striped):
This mode splits data evenly across the two Hard
Drives resulting in capacity that is the sum of
2 times the smaller volume. Data access speed
is increased however at the cost of no data
redundancy.
Two equal hard drives: The capacity is equal to
the sum of both hard drives.
Switching to this mode will prompt to initialize
and format the hard disks.
( figure 6-E) ( figure 6-F)
NOTE:
All data previously stored on the hard drive will
be lost! Please back up all data to a separate
storage before continuing.
RAID 0 Mode
( figure 6-E)
NST-400MX-S3R
Port 0
Drive A
250GB
Equal hard drives
Striping across
( figure 6-F)
Mode Configuration
12
NST-400MX-S3R
RAID 0
500GB
Port 1
Drive B Drive A
250GB 250GB
RAID 0
500GB
NST-400MX-S3R
Port 0 Port 1
Drive A
750GB
Unequal hard drives
Striping across