Jbod Mode - Vantec NST-400MX-53 User Manual

JBOD Mode:

This mode concatenates a series of physical drives as a single large volume; Hard Drive 1 and 2 are
combined into a storage capacity that is equal to the sum of each of the physical hard drives 1 and 2.
Switching to this mode will prompt to initialize and format the hard disks. If you choose to add a second
hard disk at a later time, you will need to format the entire array of disks again
NOTE:
All data previously stored on the hard drive will
be lost! Please back up all data to a separate
storage before continuing.
NST-400MX-S3
JBOD Mode
JBOD
500GB
NST-400MX-S3
Port 0 Port 1
Drive A Drive A
250GB 250GB
Equal hard drives
( figure 6-C)
JBOD
1000GB
NST-400MX-S3
Port 0 Port 1
Drive A Drive A
250GB 750GB
Unequal hard drives
( figure 6-D)
Mode Configuration
NST-400MX-S3R
JBOD Mode
JBOD
500GB
NST-400MX-S3R
Port 0 Port 1
Drive A
250GB
Equal hard drives
11
( figure 6-C) ( figure 6-D)
JBOD
1000GB
NST-400MX-S3R
Port 0
Drive A Drive A
250GB 250GB
Unequal hard drives
Port 1
Drive A
750GB