Content Content ..........................1 1.Introduction ......................2 2.System Requirements ..................2 3.Specifications/Features................3 4.Installation ........................4 5.Removal ........................7 6.Driver Installation ....................9 Windows ME/2000/XP/VISTA ................9 Windows 98SE......................9 Mac OS 9.0 or later ....................10 Mac OS 8.6 ......................10 7. Warranty ........................11...
1.Introduction The Vantec NexStar Hard Drive Dock is a complete and easy way to add or swap hard drives to your computer. It gives you the flexibility of connecting any SATA I/II hard drive to your computer via USB 2.0 / Firewire / eSATA connection without opening up your computer case or installing into an enclosure.
3.Specifications/Features Features Package Includes NexStar Hard Drive Dock Install And Access Hard Drive in Seconds USB Cable Simple to Use Design; No Need to Add Enclosure or eSATA Cable Open Case Firewire Cable Eject Button for Easy Removal of Hard Drive SATA to eSATA Bracket Supports 2.5"/3.5"...
4.Installation 1. Connect the power adapter to the NexStar Hard Drive Dock. 2. Connect the USB, eSATA, or Firewire Cable to the NexStar Hard Drive Dock and attach the other end to your computer. Power Cable eSATA Cable Firewire Cable USB 2.0 Cable...
Page 6
3. Insert 2.5” or 3.5” SATA HDD into the slot.
Page 7
3-1. When the eject button is upright, the NexStar Hard Drive Dock is ready for use.
5.Removal Warning, please push power button & turn off unit before removing the hard drive! 1. Remove the HDD safely from your computer system. 2. Push down the button to eject the HDD. (Stablize the HDD with your hand).
Page 9
3. Remove the HDD from the Hard Drive Dock.
6.Driver Installation Windows ME/2000/XP/VISTA No drivers are necessary when using Windows ME/2000/XP/VISTA. If the hard drive does not appear under My Computer, be sure to partition your hard drive. Windows 98SE 1. The first time you plug in the NexStar Hard Drive Dock into a USB port of your computer, the [Add New Hardware Wizard] dialog box will appear.
Mac OS 9.0 or later No drivers are necessary when using Mac OS 9.0 above. If the hard drive does not appear on the desktop, be sure to partition your hard drive. Mac OS 8.6 1. Unplug the NexStar Hard Drive Dock if you currently have it connected. 2.
If any parts are missing or if there are cosmetic defects, Please contact the retai l er from which you purchased the unit immediately and ask for a replacement. Vantec Thermal Technologies 43951 Boscell Rd. Fremont, CA 94538 tel: 510-668-0368 fax: 510-668-0367 website: www.vantecusa.com...