5.Installation:
Dual 3/5" RAID Enclosure w/FAN USB 3.0 (S3) or USB3 & eSATA (S3R) interface
5.1.Hardware Installation:
Installing the hard drive:
(1) Release the four screws then
pull out the rear panel and tray
of the NexStar MX.
( figure 5.1-A )
(2) Place the first HDD onto the
drive caddy then insert the HDD
into the SATA connector.
( figure 5.1-B )
(3) Place the second HDD onto the
drive caddy then insert the HDD
into the SATA connector.
( figure 5.1-C )
( figure 5.1-A )
( figure 5.1-B )
( figure 5.1-C )
Installation
6