1.Introduction 1.Introduct The Vantec NexStar® Hard Drive Dock is a complete and easy way to add or swap hard drives to your computer. It gives you the flexibility of connecting any SATA I/II hard drive to your computer via USB 2.0 / FireWire / eSATA connection without opening up your computer case or installing into an...
3.Specifications/Features Features : Package Includes : ■ NexStar Hard Drive Dock Install and Access Your Hard Drive in Seconds ■ USB Cable Simple to Use Design; No Need to Add Enclosure or eSATA Cable Open Case ■ 1394b Cable Eject Button for Easy Removal of Hard Drive ■...
4.Installation 1. Connect the power adapter to the NexStar Hard Drive Dock. 2. Connect either the USB, eSATA or FireWire Cable to the NexStar Hard Drive Dock and attach the other end to your computer. Power Cable Firewire Cable SATA USB 2.0 Cable eSATA...
Page 7
3. Insert 2.5” or 3.5” SATA HDD into the slot.
Page 8
3-1. When the eject button is upright, the NexStar Hard Drive Dock is ready for use.
5.Removal Warning, please push power button & turn off unit before removing the hard drive! 1. Remove the HDD safely from your computer system. 2. Push down the button to eject the HDD. (Stabilize the HDD with your hand).
Page 10
3. Remove the HDD from the Hard Drive Dock.
6.Driver Installation Windows 2000/XP/VISTA No drivers are necessary when using Windows 2000/ XP/VISTA. If the hard drive does not appear under My Computer, be sure to partition your hard drive. Mac OS 10. 2or later No drivers are necessary when using Mac OS 10.2 above. If the hard drive does not appear on the desktop, be sure to partition your hard drive.
The NexStar Hard Drive Dock comes with a 1 year limited warranty (90 day parts). If your unit become defective within that time frame, please go to http:// www.vantec.com.tw for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty.