Advertisement
Installing the Player
14. Get the player and the trim. Install the trim on the
player.
TRIM
PLAYER
15. Install the two clips to the trim.
16. If you are installing an in-dash CD changer, install
the harness clip to the back of the in-dash CD
changer using the 4 x 6 mm screw. Secure the
connector with the harness clip.
IN-DASH CD
CHANGER
HARNESS
CLIP
© 2004 American Honda Motor Co., Inc - All Rights Reserved.
17. Connect the bus cable 14-pin connector the player
CLIP
4219061B
18. Pull out the player. Position the player bracket on
4 x 6 mm
WASHER-
SCREW
CONNECTOR
4709040B
AII 27341 (0409)
and set the player in the pocket opening.
BUS CABLE
14-PIN
CONNECTOR
PLAYER
the player and tighten the four 5 x 8 mm washer-
screws as shown.
5 x 8 mm
WASHER-
SCREW
PLAYER
PLAYER
BRACKET
4709051B
POCKET
OPENING
5 x 8 mm
WASHER-
SCREW
4709060B
5 of 6
Advertisement
