Checking For Open Zones - ADT SAFEWATCH PRO User Manual

CHECKING FOR OPEN ZONES

B
Using the efore arming your system, all protected doors, windows and other protection zones
must be closed or bypassed (see BYPASSING PROTECTION ZONES section), otherwise
READY Key
the touchpad will display a "Not Ready" message, and the READY indicator light on your
touchpad will not be lit. The READY key can be used to display all faulted zones, making it
easier for you to secure any open zone.
To display faulted zones, simply press and release the READY [ ] key (do not enter
code first).
Secure or bypass the zones displayed before arming the system.
A "Ready" message will be displayed when all protection zones have been either closed
or bypassed and the touchpad's READY indicator light will be lit. The system can then be
armed if desired.
TO DISPLAY OPEN ZONES, PRESS THE
TYPICAL DISPLAYS
WHEN NOT READY TO ARM
DISARMED -
P
R ES S
TO S H O W FA U L TS
CUSTOM DISPLAY TOUCHPAD
AC
NOT READY
ENGLISH DISPLAY TOUCHPAD
TYPICAL DISPLAYS
INDICATING OPEN PROTECTION ZONE
(AFTER PRESSING READY KEY)
FAULT 06
BE DROOM WINDOW
CUSTOM DISPLAY TOUCHPAD
AC
06
NOT READY
ENGLISH DISPLAY TOUCHPAD
– 13 –
READY
KEY.
TYPICAL DISPLAYS
INDICATING "READY TO ARM"
DISARMED
****
RE ADY TO ARM
CUSTOM DISPLAY TOUCHPAD
ENGLISH DISPLAY TOUCHPAD
****
AC
READY