Gearbox - Husqvarna WGP3616 Operator's Manual

Depress one operator presence lever. (OPl)
WARNING!
Be sure all persons are clear of area
before engaging the blades.
IMPORTANT INFORMATION
To prolong spindle bearing clutch and belt
life, engage and disengage the blades at
approximately half throttle.
engage the blades and set the desired rpm. Higher
RPms will provide the best cutting and bagging
performance.
Grip motion control levers before shifting gears.

Gearbox

The gear drive machines have a 5-speed gearbox.
The gear selector is placed under the control panel.
Only shift gear when the machine is standing still and
on level ground.
opeRatIon
OPL and thumb latch
Engage blade
Gear shift lever
8019-062
8019-061
8019-064
23