Stopping; Emergency Stop; Normal Operating Stop; Braking - Husqvarna WGP3616 Operator's Manual

Stopping

Emergency Stop

Release both hands from the operator presence
levers. When both OPls return to their outer position,
the engine will quit and the mower will stop.
OR
Squeeze both motion control levers firmly against
handle grips and hold them securely in place. Use
thumb latches to lock both motion control levers into
the neutral position. Stop engine by pulling the throttle
control back and shutting off the key switch.

Normal Operating Stop

• Squeeze both motion control levers firmly toward
the handle grips to stop forward motion.
• Use thumbs to lift thumb latches into the neutral
slots.
• move the throttle control to the slow position.
• move blade engagement control to the off
position.
• move shift lever to the neutral position.
• Stop engine.

Braking

Squeeze both motion control levers towards the
handle grips. If desired, secure the levers using the
thumb latches.
IMPORTANT INFORMATION
Close fuel valve at the end of each mowing
session.

Stopping the Engine

If the engine has been worked hard, allow it to idle a
minute in order to attain normal operating temperature
before stopping it. Avoid idling the engine for longer
periods, as there is a risk of the spark plugs fouling.
When the machine is standing still, set the thumb
latches into the neutral position.
Disengage the blades by pulling the blade
engagement lever back.
move the throttle to the minimum position (tortoise
symbol). Turn the ignition key to the stop position.
Remove the ignition key.
Shut Off the fuel valve.
opeRatIon
Move the throttle to slow and disengage the blades
Gear shift lever in neutral
Fuel shut off valve - closed (OFF)
8019-061
8019-068
8011-437
25