Setting The Event - Event Menu; Event Settings - Sony Ipela SNC-HM662 User Manual

Setting the Event
— Event Menu
When you click Event
submenus of the Event menu expand.
The Event menu consists of Event settings.

Event settings

The Event settings which are set are displayed.
Click Add to set up a new Event.
You can set up to 3 events.
Name: Displays the event name.
Status: Displays whether the event is valid or not.
Sun/Mon/Tue/Wed/Thu/Fri/Sat/: Displays [V] on the
day(s) of the week that the event is enabled.
Time: Displays the period of time that the event is
enabled.
Trigger: Displays the event trigger.
Delete: Deletes the event settings.
Event settings screen
Event name: Input the Event settings name.
Enable this event: Select this checkbox to enable the
Event settings.
Priority: Select the priority of these Event's settings
(High/Normal/Low). The highest priority Event settings
are performed first.
Detect next motion detection or digital input after [ ]
second(s).: Input the time in seconds before disabling
the motion detection or sensor input after they have
activated.
32
Setting the Event — Event Menu
in the Administrator menu, the
To set the event
Set each item of Schedule, Trigger, Action in the Event
settings screen to set the event.
1. Schedule
Set the day(s) of the week or the period of time for
enabling the event.
2. Trigger
Select the trigger for performing the event.
Motion detection
When motion is detected, perform the event. When the
Motion detection is selected, select the checkbox of the
window name to be used. The setting of Motion
detection is required to enable this function. For details,
see "Motion detection" on page 35.
Memo
Multiple Motion detection settings can be made.
Periodically
Performs the event after a certain period. Input the
trigger interval of the event (1 to 999 minutes).