Setting The Schedule - Schedule Menu; Setting The Sensor Input/Camera Tampering Detection/Motion Detection - Event Detection Menu; Sensor Input Tab - Set The Sensor Input; Camera Tampering Detection Tab - Set The Camera Tampering Detection - Sony Ipela SNC-CH115 User Manual

Setting the Schedule
— Schedule Menu
When you click Schedule
the Schedule menu appears.
The Schedule menu consists of 6 tabs.
This is the same menu as the Schedule menu that is
displayed when you click Schedule to set the Effective
period in the following menus.
Day/Night: Schedule in the Day/Night tab of the
Camera menu
Preset position (Image 1 or 2): Schedule in the
Position Tour of the Preset position menu
e-Mail: Schedule in the Alarm sending or Periodical
sending tab of the e-Mail (SMTP) menu
FTP: Schedule in the Alarm sending or Periodical
sending tab of the FTP client menu
Alarm out: Schedule in the Alarm out 1 tab of the
Alarm output menu
Example: When setting e-Mail (SMTP) (Periodical
sending) in the Schedule menu
Use the same time schedule every day
When this item is checked, the same Start time and End
time are applied to all days. In that case, the Start time
and End time of the day from Mon (Monday) to Sun
(Sunday) cannot be input.
Mon (Monday) to Sun (Sunday)
The time period on the right of the checked day is the
effective period of the schedule.
Start time, End time
Specify the start time and the end time.
OK/Cancel
See "Buttons common to every menu" on page 32.
78
Setting the Schedule — Schedule Menu
in the Administrator menu,
Setting the Sensor input/
Camera tampering
detection/Motion
detection
— Event detection Menu
Event detection
When you click
menu, the Event detection menu appears. The Event
detection menu consists of the Sensor input, Camera
tampering detection and Motion detection.
SNC-DH120/DH220/EM520/ZM550 do not support
Sensor input.
Only supported functions are displayed.
Sensor input tab — Set the sensor
input
Sensor input mode
Set the direction of the detected input signal to the
sensor input terminal of the camera.
Normally open: Detects the alarm when the sensor
input is short-circuited.
Normally closed: Detects the alarm when the sensor
input is open-circuited.
OK/Cancel
See "Buttons common to every menu" on page 32.
Camera tampering detection tab —
Set the camera tampering detection
Camera tampering detection
Select On to activate the function to detect camera
tampering, such as direction shifting or spray. When you
select On, you can select the Sensitivity.
Sensitivity: Set the sensitivity of camera tampering
detection to High, Middle or Low.
Detection status: Display the tampering detection state
of the time when Camera tampering detection tab is
in the Administrator